Automotive and Land Vehicle Real-time Solutions
Sponsored by ADIUS
September 14-15, 2004
Ann Arbor, Michigan USA
Applied Dynamics International (ADI) and The Applied Dynamics International
Users Society (ADIUS) are pleased to announce the 2004 Real-time Solutions Symposium
focusing on Automotive and Land Vehicle Applications.
This symposium is FREE, and includes lunches both days and a continental
breakfast on Wednesday morning.
This meeting, held September 14-15, 2004 at the Four
Points by Sheraton Ann Arbor Hotel, is open to all persons. You need not
be a user of ADI products to attend. Following the Symposium luncheon on Wednesday,
ADI invites you to an open house at 1:30 PM.
In this symposium, ADI brings together a broad range of vendors each offering
value to you in your development process. In addition, customer presentations
allow you to see how different components can extend into the real-time arena.
| Day |
Time |
|
Tuesday,
September 14, 2004 |
12:00 to
1:00 PM |
Lunch at the Sheraton |
| |
|
|
| |
1:00 - 1:15 PM |
Welcome by Mr. Julius Nagy, ADI |
| |
|
|
| |
1:15 - 1:45 PM |
Real-time Vehicle Dynamics Simulation with Dymola – Mr. Joseph Gauthier,
Gauthier Simulation |
| |
|
|
| |
1:45 - 2:15 PM |
AMESim: System simulation has never been this DYNAMIC– Dr. Kevin Khalkhali,
Imagine Software |
| |
|
|
| |
2:15 - 2:45 PM |
ADI SIMsystem Emulator Control of Non-Line of Sight Cannon (NLOS-C) Concept
Technology Demonstrator (CTD) - Mr. Travis Liston, United Defense LP |
| |
|
|
| |
2:25 - 3:15 PM |
Networking break |
| |
|
|
| |
3:15 - 3:45 PM |
A Real-time in-Cycle Engine Model for HIL Application – Mr. Andy Beaumont,
Ricardo Engineering |
| |
|
|
| |
3:45 - 4:15 PM |
Multi-model Integration Technique for Increased Real-time Performance Implemented
on the ADI rtX – Dr. Clare Savaglio, ADI |
| |
|
|
| |
4:15 - 5:00 PM |
Some Improved 2nd-order Integration Methods for Real-Time Simulation –
Dr. Robert Howe, University of Michigan |
| |
|
|
| Thursday, September 15, 2004 |
8:00 - 9:00 AM |
Continental breakfast |
| |
|
|
| |
9:00 - 9:10 AM |
Welcome – Mr. Rick Schlosser, ADI |
| |
|
|
| |
9:10 - 9:30 AM |
Introduction to CarSim 6 with ADI’s SIMsystem – Mr. David Hall,
Mechanical Simulation Corporation |
| |
|
|
| |
9:30 - 10:30AM |
Challenges of Production Testing for Embedded Systems – Mr. Peter Fodor,
PTM Electronics |
| |
|
|
| |
10:30 - 11:00 AM |
Evaluation of Real-time Emulators for Future Development of Fire Control Applications
– Ms. Marcella Haghgooie, ADI and Mr. John Kelly, General Dynamics Land
Systems |
| |
|
|
| |
10:30 - 11:00 AM |
Networking break |
| |
|
|
| |
11:00 - 11:30AM |
An Efficient Development and Test Process for Body Control Modules Using Statemate
and SIMsystem – Mr. Bob Kanon, I-Logix |
| |
|
|
| |
11:30 - noon |
Integrating CAN Network Testing into HIL Simulations – Dr. Ajit Shenoy,
ADI |
| |
|
|
| Afternoon |
noon - 1:00 PM |
Lunch at the Sheraton |
| |
|
|
| |
1:30 - 5:00 PM |
Open house at ADI featuring the following ADI Product demonstrations:
- New Windows ADvantage
- rtX Chassis, featuring an ADS Controller
- rtXPowertrain featuring ADI's new high-performance engine board
- Open-loop demonstration of a security device
|
| |
|
|
For more information contact Bob Koch at (734) 973-1300 extension 305 or
adius@adi.com.
|
